This is a test
This is a test
Usage: This is a Example
The Retaining Compound Sealant Series is designed for assembling metal cylindrical components such as bearings, bushings, pins, hubs, and pulleys. It replaces costly methods like press-fitting and keyways with simpler, more efficient slip-fit solutions.
Characteristics
❯MXBON 1
- High strength, press-fit
- Achieves initial curing within 10 minutes
- Oil tolerance, vibration resistance, and wear & corrosion resistance for metal parts
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 2
- High strength, heat-resistant, non-dripping, slip-fit
- Heat resistance up to 230°C
- Achieves initial curing within 30 minutes
- High lubricity; prevents metal wear and corrosion
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 3
- High strength, slip-fit
- Achieves initial curing within 5 minutes
- Impact resistant with excellent chemical resistance
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume: 50 ml / 250 ml / 1000 ml
❯MXBON 4
- Press-fit
- Medium-high strength, low viscosity, fixture in 10 minutes.
- Use for variety of different metals
- Use for casing, pulley gear shaft and repair insufficient processing parts.
- Volume: 50 ml / 250 ml / 1000 ml
❯MXBON 4
- High strength, press-fit
- Achieves initial curing within 5 minutes
- Applicable to work pieces made of passivated materials such as stainless steel
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 4
- High strength, slip-fit
- Achieves initial curing within 10 minutes
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯This is a Duplicate
- High strength, slip-fit
- Achieves initial curing within 10 minutes
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
Technical Information
| Item No | Usage | Appearance | Viscosity (cps) | Cure Speed (min) | Gap fill (mm) |
| 1 | Low Viscosity | Green | 100~150 | 10 min | 0.05 |
| 2 | Low Viscosity | Green | 100~150 | 10 min | 0.05 |
| 3 | High Temperature | Green | 5,000~12,000 | 30 min | 0.38 |
| 4 | Slip Fit | Green | 2,000~3,000 | 5 min | 0.25 |
| 5 | Press Fit | Green | 400~600 | 5 min | 0.15 |
| 6 | Slip Fit | Green | 1,250~2,000 | 10 min | 0.4 |
